HOW UNBRICK/FLASH ANY ANDROID DEVICE USING SP-FLASH TOOL

On this Tutorial am going to show us how to Unbrick an Android device.

What does the word unbrick means?

First and foremost let's try to know what a Bricked Phone means :

 A bricked phone means the process where by your phone refuses to turn on in any way, shape or form, and there's nothing you can do to fix it. It is, for all intents and purposes, as useful as a brick. A phone stuck in a boot loop is not bricked, nor is a phone that boots straight into recovery mode

 So therefore Unbricking can be said to be the revival of a Bricked Phone.... 

Not to waste much..... Let roll

SP Flash tool is an application you could find very useful in fixing extreme cases of a bricked MTK Android (e.g Tecno, Gionee, Infinix, Opsson, Innjoo etc) like the phone not coming on at all or not booting into recovery mode etc. Lets get started:

Requirement

* A PC
* USB Cord
* Manually install VCOM drivers on the PC
* The phone you wish to flash the files to (ensure there's an SD card in the phone)
* Scatter file + files to be flashed
* Download SP Flash tool v5.1524 download SP Flash tool Latest version

Note
Try to becareful not to shake the phone while the unbricking is on process


Procedure 

STEP 1. Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there's a formatted SD card in the phone (if there's an SD card slot)
STEP 2. Launch SP Flash Tool as Administrator

STEP 3. Click on Scatter-loading by the right

4. In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word "scatter" in its name )

STEP 5. A list with ticked boxes should appear in SP flash tool (preloader, mbr, ebr etc)

STEP 6 is only for when you wish to format the phone. Skip if you don't wish to format
Warning! Do Not format unless you have the stock ROM for your exact phone model.

6a. Click Format at the top
6b. After clicking Format, a dialogue box will pop up, ensure that 'Auto Format Flash' and 'Format whole flash without Bootloader' are selected
6c. Click OK, Stop should now be red or green in color
6d. Connect the switched off phone (with battery inside) to the PC via USB cord
6e. A progress bar should load till you get a 'Success' message (green circle with OK)
6f. Disconnect the phone from PC

STEP 7. Untick the box in front of any item you do not wish to flash

STEP 8. To manually load an item that doesn't automatically get ticked after loading the scatter file, tick the box in front of that item then double-click its Location and select the corresponding file in the window that pops up
STEP 9. Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it)

STEP 10. Stop should now be prominent while other options should be grayed out
STEP 11. Connect the switched off phone (with battery inside) to the PC via USB cord
STEP 12. A progress bar should start running

STEP 13. Wait till you get a Success message (green circle with OK), do not interrupt before then

STEP 14. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone
STEP 15. Ensure to do a factory reset in recovery mode to clear any errors


ALL THANKS TO HOVATEK




DONT FORGET TO LEAVE A COMMENT........